IP Services
Ticket #17 - Repubished
24/07/11 17:26
I am reposting here Lab 17, which was published on ccieflyer.com. Next ticket, Ticket 18, which will be about MPLS and Security will be published next month on CCIEFlyer.com, then it will be republished here again.
This lab is using dynamips. Please follow the instructions found here about how to use the lab file.
For the solution Click here
For more mini labs, have a look at the mini labs page.
Also have a look at the complete troubleshooting workbook.
Network diagram
IGP diagram
Lab file
This lab is using dynamips. Please follow the instructions found here about how to use the lab file.
The problem:
- R3 is the DHCP server on V100.
- R1 was configured to be a backup for the DHCP server on R3. R1 is using object tracking and EEM to do so.
- However, the solution is not working and even if it was its too slow and unreliable. Fix the problems.
- Do not use BFD, its not working on dynamips :)
For the solution Click here
For more mini labs, have a look at the mini labs page.
Also have a look at the complete troubleshooting workbook.
Ticket #17
21/01/11 12:15
Ticket #16 - Repubished
14/01/11 20:23
I am reposting here Lab 16, which was published on ccieflyer.com. Next ticket, Ticket 17, which will be about IGP and EEM will be published on CCIEFlyer.com, then it will be republished here again.
This lab is using dynamips. Please follow the instructions found here about how to use the lab file.
Network diagram
IGP diagram
Lab file
This lab is using dynamips. Please follow the instructions found here about how to use the lab file.
The problem:
• R1 is configured with redundant bidirectional connection between R3 and R4's Lo0. Its like multihome internet connection setup.
• R2 is the preferred path between R3 and R4.
• R1 is using NAT to allow connectivity, exposing R3 as 4.3.12.3 and 4.3.15.3.
• R3 can't reach R4 and vice versa.
• Fix the problem without changing configuration on R2,R4 and R5. Keep the solution redundant.
• Use telnet to check connectivity. You are allowed to configure one static route.
For the solution Click here
For more mini labs, have a look at the mini labs page.
Also have a look at the complete troubleshooting workbook.
Ticket #16
11/11/10 22:01
Ticket #09
03/02/10 05:47
Network diagram
Lab file
This lab is using dynamips. Please follow the instructions found here about how to use the lab file.
The problem:
R1 can't telnet R3. Fix the problem without compromising security.For the solution Click here