MPLS

Ticket #18 - Repubished

23/09/11 18:00

I am reposting here Lab 18, which was published on ccieflyer.com

This lab is using dynamips. Please follow the instructions found here about how to use the lab file.

The problem:

R3 is connected to R2 via L3 MPLS VPN backbone. R3 and R2 are CEs. R1 and R5 are PEs. R4 is a P router.
R3 can't ping R2's Lo0 from its Lo0.
Fix the problem. Do not reduce the security level of the current network.

For the solution Click here

For more mini labs, have a look at the mini labs page.

Also have a look at the complete troubleshooting workbook.

Ticket #18

25/07/11 16:19

Ticket #18 is published under the CCIE Flyer. Click here for direct link.

Enjoy!

23/01/10 20:38

This lab is using dynamips. Please follow the instructions found here about how to use the lab file.

R4 can't ping R5's Lo0 IP address. Configure R2 to fix the problem.

For the solution Click here