Multicast
Ticket #15 - Repubished
30/10/10 17:58
I am reposting here Lab 15, which was published on ccieflyer.com. Next ticket, Ticket 16, which will be about IP services will be published on CCIEFlyer.com, then it will be republished here again. And so on for the next few Tickets.
This lab is using dynamips. Please follow the instructions found here about how to use the lab file.
For the solution Click here
For more mini labs, have a look at the mini labs page.
Also have a look at the complete troubleshooting workbook.
Network diagram
IGP diagram
Lab
file
This lab is using dynamips. Please follow the instructions found here about how to use the lab file.
The problem:
R1 is using v2 RIP broadcast. The network was configured with multicast-helper to transport the RIP broadcast over the multicast network to R6. However, R6 do not see R1's Lo route in its routing table. Find and fix the problem.For the solution Click here
For more mini labs, have a look at the mini labs page.
Also have a look at the complete troubleshooting workbook.
Ticket #15
04/09/10 14:39
Ticket #04
02/12/09 02:24
Network diagram
IGP diagram
Lab file
This lab is using dynamips. Please follow the instructions found here about how to use the lab file.
The problem:
R2 has joined to the 239.2.2.2 group. R4 Can't ping to that address. Fix the problem.For the solution Click here